Home > Skid Steer and Excavator Attachments
Skid Steer and Excavator Attachments
This bucket digs narrow, precise trenches for drainage or utilities without disturbing the surrounding soil
Fits: Bobcat E35 R2 Excavator
- 12 inch width digs a tight, accurate trench so you only remove the material you need.
- Ideal for precision work in tight spaces on utilities, landscaping, and small excavation jobs.
- Heavy duty, hardened-steel design stands up to tough, compacted soils and daily rental use.
- Tooth edge bites into hard ground for faster trenching and less time reworking the cut.
- Quick-attach compatibility lets you swap this bucket on and off your excavator in minutes to match each task
This bucket is perfect for precision grading, back-dragging, and loading dirt or gravel on your skid steer in demanding …
Fits: Kubota SVL65-2 Compact Tracked Loader
- 68 inch low profile design gives you good bucket capacity while keeping a clear view of the cutting edge for precise grading and loading.
- Heavy duty shell and long‑floor option are built for repeated use in gravel, soil, and construction debris without premature wear.
- Available with bolt‑on cutting edge and standard side cutters to improve penetration and protect the bucket lip in abrasive conditions.
- Flat back and integrated tie‑down points make it easy to transport or use the bucket for pushing, backdragging, and light dozing on site prep jobs.
Conquer tough digging, loading, and grading jobs with the Land Pride HD74 74" Low Profile Bucket, engineered for heavy‑d…
Fits: Kubota SVL75-3 Compact Tracked Loader
1 available
Heavy duty brush mower that efficiently cuts, clears, and mulches brush, thickets, grass, and small trees
Fits: Kubota SVL65-2 Compact Tracked Loader, Kubota SVL75-3 Compact Tracked Loader
- Cuts grass, brush, and small trees in one pass
- 72 inch cutting width clears a large path fast, so you cover more ground in fewer passes.
- Float-n-Tilt deck and rear roller follow uneven ground for a smoother, more even cut with less scalping.
- Built from thick 1/4 inch steel with reinforced deck ring for long life in tough brush and rocky terrain.
This bucket digs narrow, precise trenches for drainage or utilities without disturbing the surrounding soil
Fits: Bobcat E35 R2 Excavator
- 18 inch width cuts a clean, accurate trench with minimal extra digging or backfill.
- Heavy duty build handles rocky, compacted soil without bending.
- Perfect for pipe, conduit, and cable trenches with a professional profile.
- Quick-attach compatible so you can swap buckets fast and keep the machine working.
Move, lift, and stack pallets or bulky materials with confidence using these pallet forks, ideal for farms, landscapers,…
Fits: Kubota SVL65-2 Compact Tracked Loader, Kubota SVL75-3 Compact Tracked Loader
- Robust frame and fork rating around 3,000 lb let you safely move heavy seed, feed, lumber, and jobsite materials.
- Forks slide and lock along the rail so you can quickly set the right spacing for different pallet sizes and odd‑shaped loads.
- 48 inch forks handle standard pallets easily while still giving you good maneuverability in tight yards and barns.
- Tall back guard keeps loads from tipping toward the cab, improving operator safety and load stability on uneven ground.
Heavy duty grapple that allows you to pick up a variety of debris, from logs and brush to rocks and concrete
Fits: Kubota SVL65-2 Compact Tracked Loader, Kubota SVL75-3 Compact Tracked Loader
- Massive 72 inch width and 48 inch jaw opening let you grab and move big piles of brush, logs, rocks, and debris in fewer trips.
- Curved rake teeth glide over the ground to pull roots and debris while leaving most of the soil in place, ideal for land and storm cleanup.
- Built from high-strength Grade 100/T-1 steel with heavy reinforcement so it stands up to serious contractor use.
- Dual heavy-duty hydraulic cylinders deliver strong clamping force so material stays securely locked in the grapple while you travel.
This aggressive, multipurpose, leveler is the perfect solution for site preparation. It cultivates, cuts, grades, and le…
Fits: Kubota SVL65-2 Compact Tracked Loader, Kubota SVL75-3 Compact Tracked Loader
- 78 inch working width levels and grades wide passes quickly, ideal for driveways, pads, and large landscape areas.
- Multipurpose design cultivates, cuts, grades, and levels, so one attachment can handle most site prep and finish work.
- Dual cutting edges work in both directions, letting you grade moving forward or backdrag in reverse to save time.
- Hydraulic scarifying teeth break up hard, compacted ground so you can then smooth it in the same pass.
The Stump Bucket is designed for maximum prying strength for the toughest stump and rock removal jobs
Fits: Kubota SVL65-2 Compact Tracked Loader, Kubota SVL75-3 Compact Tracked Loader
- Narrow, deep bucket focuses force for maximum prying power, making stubborn stumps and rocks easier to pop out.
- Engineered fulcrum point lets you use the skid steer like a giant pry bar, reducing time and effort compared to digging with a standard bucket.
- Heavy grade 50 steel, reinforced mounting plate, and full welds inside and out are built to handle high stress without twisting or cracking.
- Serrated side edges slice through roots and packed soil so you can cut, loosen, and lift in the same motion.
This six-way hydraulically controlled dozer blade blade is ideal for dozing leveling roads, yards, and job sites
Fits: Kubota SVL65-2 Compact Tracked Loader, Kubota SVL75-3 Compact Tracked Loader
- 96 inch blade turns your skid steer into a high‑performance dozer, grader, and leveler for roads, pads, and jobsite prep.
- Six‑way hydraulic control (up/down, angle, tilt) lets you shape crowns, ditches, and slopes with precise control from the cab.
- Adjustable depth skid shoes and optional EZ Grading/Leveling package help eliminate blade hop for smoother, more accurate finishes.
- Heavy‑duty US steel moldboard and industrial cylinders are built to withstand tough clay, gravel, and packed base.
These hydraulic pallet forks use hydraulic power to adjust the width between forks without leaving the operator's seat
Fits: Kubota SVL65-2 Compact Tracked Loader, Kubota SVL75-3 Compact Tracked Loader
- Hydraulic fork spacing lets you adjust fork width from the cab, speeding up handling of mixed pallet sizes and odd loads.
- 48 inch forks are sized for standard pallets while still offering good visibility and maneuverability in tight yards or warehouses.
- High load rating (around 5,500 lb at 24 inch load center) allows confident lifting of heavy materials, blocks, and jobsite supplies.
- Walk‑through, quick‑attach frame with side steps makes getting in and out of the machine easier and faster during frequent loading cycles.
This powerful auger drive unit is durable enough to withstand any construction or utility use in even the toughest groun…
Fits: Kubota SVL65-2 Compact Tracked Loader, Kubota SVL75-3 Compact Tracked Loader
- Planetary drive delivers high torque at low speed, so you can drill in tough soils and clay without stalling.
- Reverse rotation feature cleans the auger in the hole, saving time and effort between digs.
- Handles a wide range of bit sizes for everything from fence posts to large footings and tree holes.
- Double‑flighted bits move more dirt out of the hole in a single pass, speeding up each hole and leaving a cleaner site.
1 available
Need Help Finding Equipment?
Call us at 907-883-9697 and we'll help you find the right equipment for your project.
Added to Cart
Rates and availability may vary by location and do not include taxes or optional charges.